110級碩士班

日期	學生	報告題目
2021/06/05	黃士昕	Blind-hole drilling of Al2O3/6061Al composite using rotary electro-discharge machining
2021/10/05	黃士昕	Measurement and inspection of electrical discharge machined steel surfaces using deep neural networks
2021/10/12	王岱璟	Magnetic field-assisted electrochemical discharge machining
2021/10/19	李宗陽	Improving the machining efficiency in electrochemical discharge machining (ECDM) microhole drilling by offset pulse voltage
2021/10/26	宋遠輊	Machining characteristics of titanium alloy (Ti-6Al-4V) using a combination process of EDM with USM
2021/11/02	褚子淵	Micro-hole machining using micro-EDM combined with electropolishing
2021/11/16	劉庭銘	Study of precision micro-holes in borosilicate glass using micro EDM combined with micro ultrasonic vibration machining
2022/01/25	黃士昕	Surface roughness prediction of machined aluminum alloy with wire electrical discharge machining by different machine learning algorithms
2022/02/15	王岱璟	Fabrication and Characterization of Through-Glass Vias by the ECDM Process
2022/02/22	李宗陽	The effects of magnetic field and ethanol addition on the electrochemical discharge machining
2022/03/01	宋遠輊	Design and optimization of electrolyte flow fields in electrochemical machining of cross-channel array with tool vibration
2022/03/15	褚子淵	Electrochemical micro-machining of high aspect ratio micro-tools using quasi-solid electrolyte
2022/03/22	劉庭銘	Experimental study on tool wear in ultrasonic vibration–assisted milling of C/SiC composites
2022/06/07	黃士昕	Machine learning and statistical approach in modeling and optimization of surface roughness in wire electrical discharge machining
2022/06/21	李宗陽	Machining performance enhancement of deep micro drilling using electrochemical discharge machining under magnetohydrodynamic effect
2022/06/28	王岱璟	Fabrication and Characterization of Through-Glass Vias by the ECDM Process
2022/07/05	宋遠輊	Application of nano electrolyte in the electrochemical discharge machining process
2022/07/19	劉庭銘	Ultrasonic Vibration and Cryogenic assisted drilling of Aluminum-CFRP Composite Stack–An innovative approach
2022/08/23	黃士昕	Multiobjective Optimization of Surface Roughness and Tool Wear in High-Speed Milling of AA6061 by Machine Learning and NSGA-II
2022/08/30	王岱璟	Influence of tool electrode feed rate in the electrochemical discharge drilling of a glass substrate
2022/09/06	李宗陽	Effect of Tool Electrode-Workpiece Gap in the Microchannel Formation by Electrochemical Discharge Machining
2022/09/13	宋遠輊	Effect of solution conductivity on tool electrode wear in electrochemical discharge drilling of nickel-based alloy
2022/09/27	褚子淵	Electrochemical machining on blisk channels with a variable feed rate mode
2022/11/08	劉庭銘	Longitudinal-torsional coupled rotary ultrasonic machining of ZrO2 ceramics: An experimental study
2022/12/20	黃士昕	Development of an On-Line Defect Detection System for EDM Process
2022/12/27	王岱璟	Experimental Study on Ultrasonic Vibration-Assisted WECDM of Glass Microstructures with a High Aspect Ratio
2023/01/03	李宗陽	Experimental Set Up to Improve Machining Performance of Silicon Dioxide (Quartz) in Magnetic Field Assisted TW-ECSM Process
2023/01/17	宋遠輊	Numerical and experimental analysis of high-aspect-ratio micro-tool electrode fabrication using controlled electrochemical machining
2023/02/07	褚子淵	Precision electrochemical machining of tungsten micro-rods using wire electrochemical turning method
2023/03/21	劉庭銘	Hole exit quality and machined surface integrity of 2D Cf/SiC composites drilled by PCD tools
2023/05/09	王岱璟	Effect of tool-electrode material in through-hole formation using ECDM process
2023/05/23	李宗陽	Influence of electrolyte flow on transfer characteristics of electrochemical machining for micro-hole
2023/06/20	宋遠輊	Fabrication of tungsten micro-rods by ECM using ultra-short-pulse bipolar current
2023/06/27	褚子淵	Flow field research on electrochemical machining with gas film insulation
2023/09/12	劉庭銘	In-situ characterization method for tool ultrasonic vibration in rotary ultrasonic machining based on radiated acoustic pressure
2023/10/17	宋遠輊	Effects of process parameters on jet electrochemical machining of SiC particle-reinforced aluminum matrix composites
2024/01/30	劉庭銘	Experimental research on micro hole drilling of polycrystalline Nd:YAG
2024/02/27	宋遠輊	A Review on Recent Achievements and Challenges in Electrochemical Machining of Tungsten Carbide
2024/05/14	劉庭銘	Drilling of alumina and zirconia ceramics using diamond-coated carbide drill
2024/05/28	宋遠輊	Effect of tool rotation on the fabrication of micro-tool by electrochemical micromachining