109級碩士班

日期	學生	報告題目
2020/08/04	鄭安傑	Study of gas film quality in electrochemical discharge machining
2020/08/18	蔡依婷	Enhancement of ECDM efficiency and accuracy by spherical tool electrode
2020/08/25	余紹華	Improving machining performance of wire electrochemical discharge machining by adding SiC abrasive to electrolyte
2020/09/01	邱品翰	EDM performance of Cr/Cu-based composite electrodes
2020/09/22	舒慶哲	Effects of polarization on machining accuracy in pulse electrochemical machining
2020/10/06	張晉榕	Improvement of machining accuracy in EDCM by enhanced electrochemical reaming based on a non-metallic backing layer
2020/10/27	劉驊	Micro-hole machining of carbide by electric discharge machining
2020/10/27	舒慶哲	Surface integrity of holes machined by electrochemical discharge drilling method
2020/11/03	張晉榕	Microarray hole formation in glass using electrochemical discharge machining
2020/12/01	黃信睿	A study on the characterization of high nickel alloy micro-holes using micro-EDM and their applications
2020/12/01	陳俊樺	Vibration assisted wire electrochemical micro machining of arraymicro tools
2020/12/08	彭武釧	Study of added powder in kerosene for the micro-slit machining of titanium alloy using electro-discharge machining
2020/12/15	鄭安傑	Video based process observations of the pulse electrochemical machining process at high current densities and small gaps
2020/12/29	蔡依婷	Micro-Drilling of Sapphire using Electro Chemical Discharge Machining
2020/12/29	陳俊樺	Experimental investigation of micro wire electrochemical discharge machining by using a rotating helical tool
2021/01/19	舒慶哲	Mirror-like finishing by electrolyte jet machining
2021/01/19	余紹華	Research on oil film-assisted wire electrochemical discharge machining
2021/01/26	邱品翰	Rotary ultrasonic machining of sapphire: feasibility study and designed experiments
2021/02/23	陳俊樺	Study on wire electrochemical machining assisted with large-amplitude vibrations of ribbed wire electrodes
2021/03/16	舒慶哲	Micro Machining by Wire-Preposed Jet Electrochemical Machining
2021/03/23	張晉榕	An electrochemical discharge drilling method of small deep holes
2021/04/06	陳俊樺	Wire electrochemical micromachining of Ni-based metallic glass using bipolar nanosecond pulses
2021/04/27	張晉榕	Investigating the effect of mixed alkaline electrolyte (NaOH + KOH) on the improvement of machining efficiency in 2D electrochemical discharge machining (ECDM)
2021/04/27	劉驊	Improvement of efficiency of stamp flushing method in ECM
2021/05/04	黃信睿	Control of Kerf Width in Multi-wire EDM Slicing of Semiconductors with Circular Section
2021/05/11	彭武釧	Past and current trends in electric discharge based machining of Silicon Carbide
2021/06/13	鄭安傑	In-Situ Fabrication of Tube Electrodes with Array Slits using Multi-Wire Electrochemical Machining
2021/06/29	蔡依婷	On prolongation of discharge regime during ECDM by titrated flow of electrolyte
2021/07/06	余紹華	The observation of growth and diffusion of electrolytic product in ECM
2021/07/12	邱品翰	Ultrasonic-Vibration-Assisted Micromachining of Sapphire
2021/08/10	劉驊	Study on Ultrasonic Assisted Electrochemical Drill-Grinding of Superalloy
2021/08/17	黃信睿	Experiments with Miniature Wire EDM for Silicon
2021/08/24	彭武釧	Influence of open voltage and servo voltage during Wire-EDM of silicon carbides
2021/08/31	余紹華	Study on the influence of dynamic characteristics of bubbles on electrochemical discharge machining conductive materials
2021/09/07	蔡依婷	Investigations on quantification and replenishment of vaporized electrolyte during deep micro-holes drilling using pressurized flow-ECDM process
2021/09/14	鄭安傑	Workpiece vibration in feed direction assisted electrochemical cutting using tube electrode with inclined holes
2021/09/28	邱品翰	Ultrasonic cavitation and vibration hybrid-assisted micro-drilling
2021/11/30	黃信睿	Extreme wire electrical dischargemachining based on semiconductor characteristics
2021/12/07	彭武釧	Direct observation of discharging phenomena in vibration-assisted micro-electrical discharge machining
2021/12/14	鄭安傑	Fabrication of a Large-aspect-ratio Single-thread Helical Electrode using Multiple Wire Electrochemical Micromachining
2021/12/21	蔡依婷	Experimental investigation of surfactant-mixed electrolyte into electrochemical discharge machining (ECDM)process
2022/01/04	余紹華	Experimental investigation of magnetohydrodynamic effect in electrochemical discharge machining
2022/01/18	邱品翰	Comparative Assessment of Delamination control techniques in Conventional drilling of CFRP
2022/03/29	劉驊	Ultrasonic assisted drilling of cemented carbide
2022/04/26	黃信睿	Study on analysis of kerf width variation in WEDM of insulating zirconia
2022/05/03	彭武釧	Some Effects on EDM Characteristics by Assisted Ultrasonic Vibration of the Tool Electrode
2022/05/10	鄭安傑	Micro Electrochemical Milling of Micro Metal Parts with Rotating Ultrasonic Electrode
2022/05/17	蔡依婷	Investigation of the Material Removal Mechanism in Electrochemical Discharge Drilling Using a High-Speed Rotating Helical Tool-Electrode
2022/05/24	余紹華	On controlling of gas film shape in electrochemical discharge machining process for fabrication of elliptical holes
2022/05/31	邱品翰	Amplitude effect on micro-hole drilling of 3D needled Cf/SiC by ultrasonic vibration
2022/07/26	劉驊	Study on the Simulation and Experiment of Ultrasonic-assisted Vibration Drilling of Ti6Al4V
2022/08/09	黃信睿	Understanding novel assisted electrode from a theoretical and experimental perspectives for EDM of aluminum nitride ceramics
2022/08/16	彭武釧	A novel technique for slicing SiC ingots by EDM utilizing a running ultra-thin foil tool electrode
2022/11/22	劉驊	Precise Drilling of Holes in Alumina Ceramic (Al2O3) by Rotary Ultrasonic Drilling and its Parameter Optimization using MOGA-II
2022/11/29	黃信睿	Effect of Conductive Coatings on Micro-Electro-Discharge Machinability of Aluminum Nitride Ceramic Using On-Machine-Fabricated Microelectrodes
2022/12/13	彭武釧	Study on Slicing of Conductive SiC Ingot by Oil and Water type WEDM
2023/03/28	劉驊	An Experimental Study of the Surface Roughness of SiCp/Al with Ultrasonic Vibration -Assisted Grinding
2023/04/18	黃信睿	A comparative investigation onmagnetic field–assisted EDM of magnetic and non-magnetic materials
2023/04/25	彭武釧	Micromachining of Silicon Carbide using Wire Electrical Discharge Machining
2023/10/03	劉驊	Evaluation and optimization of machining performance for rotary ultrasonic machining of Al/SiC composite material
2024/05/21	劉驊	Study on Surface Characteristics andWork Hardening of SiCp/Al Composites by SCCO2-MQL Combined with Ultrasonic Vibration Milling